Rainier AWD L6-4.2L VIN S (2005)
Front Steering Knuckle: Service and Repair
Steering Knuckle Replacement (4WD)
Tools Required
^
J24319-B Steering Linkage and Tie Rod Puller
^
J43631 Ball Joint Remover
Removal Procedure
1. Remove the tire and wheel center cap.
2. Remove the drive axle nut.
3. Raise and support the vehicle. Refer to Vehicle Lifting.
4. Remove the tire and wheel.
5. Remove the wheel hub and bearing.
6. Remove the outer tie rod retaining nut.
7. Disconnect the outer tie rod from the steering knuckle using J24319-B.
