Rainier AWD L6-4.2L VIN S (2005)
9. Remove the wheel hub and bearing to the steering knuckle mounting bolts.
10. Remove the wheel hub and bearing from the steering knuckle.
11. Remove the splash shield from the steering knuckle.
Installation Procedure
1. Install the splash shield to the steering knuckle. Align the splash shield to the steering knuckle threaded holes.
2. Install the wheel hub and bearing to the steering knuckle. Align the threaded holes.
3. Install the wheel hub and bearing to the steering knuckle mounting bolts.
Tighten
Tighten the wheel hub and bearing mounting bolts to 105 Nm (77 ft. lbs.).
