Rainier AWD L6-4.2L VIN S (2005)
6. Remove the TCC PWM solenoid retainer.
7. Remove the TCC PWM solenoid in order to access one of the TCC solenoid retaining bolts.
8. Remove the pressure control solenoid retainer.
9. Remove the pressure control solenoid.
10. Remove the TCC solenoid retaining bolts and the valve body bolts which retain the internal wiring harness.
11. Using J28458, release the pass-through electrical connector from the transmission case.
1. Use the small end of the J28458 over the top of the connector.
2. Twist in order to release the four tabs retaining the connector.
3. Pull the harness connector down through the transmission case.
12. Remove the TCC solenoid (with O-ring seal) and wiring harness assembly from the transmission case.
