Rainier AWD L6-4.2L VIN S (2005)
2. Install the 3-4 accumulator pin (1) into the transmission case and retain the pin with J36850.
3. Install the 3-4 accumulator piston (2) onto the pin (1) in the transmission case.Ensure that the 3-4 accumulator piston legs face away from the
transmission case.
4. Install the J25025-B (2, 3) to the transmission case.
5. Install the spacer plate to transmission case gasket and the spacer plate to valve body gasket to the spacer plate; use J36850 in order to retain the
gaskets to the spacer plate.
^
The case gasket is identified by a C. Be sure to place the case gasket on the transmission case side of the spacer plate.
^
The valve body gasket is identified by a V.Be sure to place the valve body gasket on the valve body side of the spacer plate.
6. Ensure that the solenoid screens (1, 2) are in place on the spacer plate.
7. Place the checkball (3) on the spacer plate in the location shown.
8. Place the 3-4 accumulator spring (4) on the spacer plate.
9. Install the spacer plate and related components to the transmission.
