Rainier AWD L6-4.2L VIN S (2005)
10. Notice: Refer to Fastener Notice in Service Precautions.
Notice: Torque valve body bolts in a spiral pattern starting from the center. If the bolts are torqued at random, valve bores may be distorted and
inhibit valve operation.
Tighten the control valve body bolts in a spiral pattern starting from the center, as indicated by the arrows.
Tighten the control valve body bolts (in sequence) to 11 Nm (97 inch lbs.).
11. Ensure that the manual detent spring is aligned properly with the detent lever.
Tighten the manual detent spring bolt to 31 Nm (23 ft. lbs.).
12. Install the TCC solenoid with a new O-ring seal to the valve body.
13. Install the TCC solenoid bolts.
