buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Memory Systems - Personalization Feature Changes|Page 5409 > < M/T - Hydraulic Clutch Bleeding Procedure Improvement
Page 1
background image

Clutch Pedal Assembly: Technical Service Bulletins
Memory Systems - Personalization Feature Changes

Bulletin No.: 04-08-128-002

Date: September 02, 2004

INFORMATION

Subject:
Changes to Personalization Features

Models:
2005 Buick Rainier
2005 Chevrolet TrailBlazer, TrailBlazer EXT
2005 GMC Envoy, Envoy XL, Envoy XUV

with Memory Seat (RPO AR9), Memory Mirror (RPO DS3), Power Adjustable Pedals (RPO JF4) and Driver Information Center (RPO U68)

In a continuing effort to further simplify the personalization and memory recall features, at the start of the 2005 model year several additional
modifications were introduced. Please take time to familiarize yourself with these 2005 feature modifications, so that you are in the best position to
properly represent the product.

The controls for the memory function are located on the driver's door.

These buttons are used to program and recall memory settings for the driver's seating position, both outside mirror positions and the adjustable pedals, if
equipped. The settings for these features can be saved for up to two drivers.

To store the memory settings, do the following steps:

1.

Adjust the driver's seat, including the seatback recliner and lumbar, both of the outside mirrors and the adjustable pedals, if equipped, to the
desired position.

2.

Press and hold the 1 or 2 button of the memory control for three seconds. A double chime will sound to let you know that the position has been
stored.

To repeat the procedure for a second driver, follow the preceding steps, but press the other numbered memory control button.

To recall the memory settings, press and release button 1 or 2 while the vehicle is in PARK (P). A single chime will sound and the memory
position will be recalled.

To stop recall movement of the memory seat feature at any time, press one of the memory buttons or power seat controls. The feature from earlier
model year vehicles, to recall by use of the remote keyless entry transmitter or by placing the key in the ignition, has been eliminated.

DIC Vehicle Personalization

Driver 1 and Driver 2 vehicle personalization features selected using the Driver Information Center (DIC), have been eliminated in favor of one set of
"Vehicle Settings".

Memory Systems - Personalization Feature Changes|Page 5409 > < M/T - Hydraulic Clutch Bleeding Procedure Improvement