Rainier AWD L6-4.2L VIN S (2005)
Notice: Refer to Fastener in Service Precautions.
4. Install the ABS sensor to the wheel hub and bearing.
5. Install the ABS sensor mounting bolt to the wheel hub and bearing.
Tighten
Tighten the ABS sensor to the wheel hub and bearing mounting bolt to 18 Nm (13 ft. lbs.).
6. Install the brake rotor.
7. Install the tire and wheel.
8. Lower the vehicle.
9. Install the drive axle nut.
Tighten
Tighten the drive axle nut to 140 Nm (103 ft. lbs.).
10. Install the tire and wheel center cap.
