Rainier AWD L6-4.2L VIN S (2005)
Washer Fluid Level Switch: Service and Repair
WASHER SOLVENT CONTAINER LEVEL SENSOR REPLACEMENT
REMOVAL PROCEDURE
1. Remove the washer solvent container.
2. Using 2 flat-bladed tools, gently pry the level sensor switch (2) from the container (1).
3. Remove the level sensor switch grommet and discard.
INSTALLATION PROCEDURE
1. Install a new level sensor switch grommet into the washer solvent container (1).
2. Lubricate the grommet with washer fluid to aid in the installation of the level sensor switch.
3. Ensure the square tab (3) is positioned vertical to the washer container.
4. Push inward in order to seat the level sensor (2) into the grommet.
5. Install the washer solvent container.
