Rainier AWD L6-4.2L VIN S (2005)
Windshield Washer Reservoir: Service and Repair
WASHER SOLVENT CONTAINER REPLACEMENT
REMOVAL PROCEDURE
1. Remove the air cleaner cover (1).
2. Remove the nuts securing the washer container to the wheelhouse.
3. Disconnect the electrical connectors from both washer pumps.
4. Disengage the electrical harness clips (1) for the level sensor switch harness.
5. Disconnect the electrical connector from the level sensor switch.
6. Disconnect the 2 washer hose connections (1, 4) above the coolant reservoir.
7. Partially lift the washer container from the engine compartment and disengage the clip for the rear washer pump electrical harness.
8. Remove the washer solvent container from the engine compartment wheelhouse studs.
9. Drain the washer solvent into a suitable container.