buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Headphones / Earphones > < 07-08-44-016A|Page 10222
Page 2
background image

To play a disc, gently insert the disc with the label side up, into the loading slot. The DVD player will continue to load the disc and the player will
automatically start if the vehicle ignition is in an enabled power mode. If a disc is already in the player, press the play/pause button on the face of the
DVD player or on the remote control. Some DVDs will not allow the user to fast forward or skip the copyright or previews. Some DVDs will
automatically begin to play after the previews have finished. If the DVD does not begin to play the main title, refer to the on-screen instructions, and
press play on the DVD player buttons or on the remote control.

STOPPING AND RESUMING PLAY

To stop a disc, press and release the stop/eject button on the DVD player or the remote control. To resume playback, press the play/pause button on
the DVD player or the remote control. The movie should resume play from where it was stopped. If the disc has been ejected, or if the stop button has
been pressed 2 times, the disc will resume play at the beginning of the main title.

EJECTING THE DISC

Press the eject button on the DVD player to eject the disc.

If a disc is ejected from the DVD player but is not removed, the DVD player will reload the disc within 25 to 30 seconds. The disc will then be stored
in the DVD player. The DVD player will not resume play of this disc automatically upon its reload.

DVD MESSAGES

The following errors may be displayed on the video screen monitor.

Disc Format Error:  This message will be displayed if a disc is inserted upside down, the disc is not able to be read, or if the disc format is not
compatible with the DVD player.

Load / Eject Error:  This message will be displayed if the disc is not able to properly load or eject.

Disc Play Error:  This message will be displayed if the DVD player cannot play the disc. Severely damaged discs will cause this error.

Region Code Error:  This message will be displayed if the region code of the DVD media is not compatible with the DVD player.

No Disc:  This message will be displayed if the play button is pressed and there is no disc in the DVD player.

Headphones / Earphones > < 07-08-44-016A|Page 10222