Rainier AWD V8-5.3L VIN P (2004)
Cowl Moulding / Trim: Service and Repair
Air Inlet Grille Panel Replacement (Rainier)
Removal Procedure
1. Remove the windshield wiper arms.
2. Remove the air inlet grille panel retaining nuts.
3. Remove the air inlet grill panel retainers.
4. Remove the fixed antenna mast.
5. Disconnect the washer hose (2) at the coolant recovery tank.
6. Remove the air inlet grille panel from the vehicle, by pulling upwards and to the rear in order to disengage the retaining clips.
Installation Procedure
1. Position the air inlet grille panel to the rear edge of the hood.
2. Push downward on the air inlet grille panel to seat the retaining clips.
