Rainier AWD V8-5.3L VIN P (2004)
Air Door Actuator / Motor: Service and Repair
Air Temperature Actuator Replacement - Auxiliary
AIR TEMPERATURE ACTUATOR REPLACEMENT - AUXILIARY
REMOVAL PROCEDURE
1. Remove the right rear quarter trim panel.
2. Disconnect the electrical connector from the air temperature actuator.
3. Remove the retaining screws from the air temperature actuator.
4. Remove the air temperature actuator (1) from the rear HVAC module.
INSTALLATION PROCEDURE
1. Install the air temperature actuator (2) to the rear HVAC module.
2. Install the screws to the actuator.
NOTE: Refer to Fastener Notice in Service Precautions.
See: Service Precautions/Vehicle Damage Warnings
Tighten
Tighten the screws to 1.9 N.m (17 lb in).
3. Connect the electrical connector to the air temperature actuator.
4. Recalibrate the air temperature actuator, See: Testing and Inspection/Programming and Relearning
5. Install the right rear quarter trim panel.
