Rainier AWD V8-5.3L VIN P (2004)
Air Door Actuator / Motor: Service and Repair
Air Temperature Actuator Replacement - Left
AIR TEMPERATURE ACTUATOR REPLACEMENT - LEFT
REMOVAL PROCEDURE
1. Remove the I/P carrier.
2. Remove the air temperature actuator-left (1) retaining screws.
3. Disconnect the air temperature actuator-left electrical connector.
4. Remove the air temperature actuator-left.
INSTALLATION PROCEDURE
1. Install the air temperature actuator-left (1).
2. Install the air temperature actuator-left retaining screws.
NOTE: Refer to Fastener Notice in Service Precautions.
See: Service Precautions/Vehicle Damage Warnings
Tighten
Tighten the screws to 1.9 N.m (17 lb in).
3. Connect the air temperature actuator-left electrical connector.
4. Install the I/P carrier.
5. Recalibrate the air temperature actuator on vehicles equipped with automatic climate control (C68), See: Testing and Inspection/Programming
and Relearning
