Rainier AWD V8-5.3L VIN P (2004)
Evaporative Emissions Hose: Service and Repair
EVAP Hoses/Pipes Replacement - Canister Vent
EVAPORATIVE EMISSION (EVAP) HOSES/PIPES REPLACEMENT - CANISTER VENT
REMOVAL PROCEDURE
IMPORTANT: Clean all evaporative emission (EVAP) pipe connections and surrounding areas before disconnecting the pipes in order to avoid
possible EVAP system contamination.
1. Remove the fuel tank.
2. Disconnect the evaporative emission (EVAP) canister vent pipe from the canister (3).
3. Disconnect the EVAP canister vent pipe at the EVAP vent valve (1).
4. Cap the EVAP vent valve and canister in order to prevent possible EVAP system contamination.
5. Remove the EVAP canister vent pipe.
INSTALLATION PROCEDURE
1. Install the EVAP canister vent pipe.
2. Remove the caps from the EVAP vent valve and canister.
3. Connect the EVAP canister vent pipe at the EVAP vent valve (1).
4. Connect the EVAP canister vent pipe to the canister (3).
5. Install the fuel tank.
