Rainier AWD V8-5.3L VIN P (2004)
12. Perform the following steps in order to Connect the fuel injector electrical connectors.
12.1. Install the connectors to their corresponding injectors to ensure correct reassembly.
12.2. Connect the fuel injector electrical connector.
12.3. Push the CPA retainer (2) on the connector in 1 click.
12.4. Repeat the steps for each injector electrical connector.
13. Install the electrical harness to the clips on ignition coil bracket.
14. Connect the following electrical connectors on the right hand side of the engine:
-
Coil main electrical harness (1)
-
ETC (2)
-
Fuel injectors (3)
15. Install the electrical harness to the clips on ignition coil bracket.
