Rainier AWD V8-5.3L VIN P (2004)
Resonator: Service and Repair
AIR CLEANER RESONATOR OUTLET DUCT REPLACEMENT
REMOVAL PROCEDURE
1. Loosen the clamps at the following:
-
Mass airflow/intake air temperature (MAF/IAT) sensor.
-
Throttle body
2. Remove the air cleaner outlet duct bolt.
3. Remove the air cleaner outlet duct.
INSTALLATION PROCEDURE
1. Install the air cleaner outlet duct.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the air cleaner outlet duct bolt.
Tighten
Tighten the bolt to 10 N.m (89 lb in).
3. Tighten the clamps at the following:
-
MAF/IAT sensor.
-
Throttle body