Rainier AWD V8-5.3L VIN P (2004)
22. Disconnect the inflatable restraint side impact module-left connector (1), located under the driver seat.
23. Cut the side impact module-left connector out of the vehicle, leaving at least 16 cm (6 in) of wire at the connector.
24. Strip 13 mm (0.5 in) of insulation from each of the connector wire leads.
25. Cut two 4.6 m (15 ft) deployment wires from a 0.8 mm (18 gage) or thicker multi-strand wire. These wires will be used for the side impact
