Rainier AWD V8-5.3L VIN P (2004)
Headlamp Switch: Service and Repair
HEADLAMP SWITCH REPLACEMENT
REMOVAL PROCEDURE
1. Open the left instrument panel (IP) access cover.
2. Reach into the access hole and release the 4 retaining tabs located on the headlamp switch behind the IP.
3. Remove the headlamp switch from the IP, through the IP access hole.
4. Disconnect the electrical connectors from the headlamp switch.
5. Remove the headlamp from the IP.
INSTALLATION PROCEDURE
1. Position the headlamp switch near the access hole.
2. Connect the electrical connectors to the headlamp switch.
