Rainier AWD V8-5.3L VIN P (2004)
5. Disconnect the air spring compressor electrical connection (2).
Important: Ensure the color on air supply lines match the color on the air spring compressor for reassembly.
6. Disconnect the air supply lines (3) from the air spring compressor (1).
7. Remove the air spring compressor from the vehicle.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
Important: Check the air supply lines for deep scores or cuts. If the air supply lines are damage the lines must be replaced.
1. If no damage to the air supply pipes is evident, then remove the fittings from the new compressor and use existing fittings that are already attached
to air supply lines. Install the air supply lines with existing fittings to the air spring compressor.
Tighten the air supply line fittings to 2.25 Nm (18.5 lb in).
2. If damage is evident to the air supply lines, then replace the air supply lines.