Rainier AWD V8-5.3L VIN P (2004)
1. Inspect all of the parts for unusual wear, cracks, or other damage.
2. Put a light coat of the recommended grease on the inner and the outer race grooves.
3. Insert the inner race (1) into the cage (2) by rotating the inner race downward.
4. Hold the inner race (1) at 90 degrees to the centerline of the cage.
5. Align the lands of the inner race (2) with the windows of the cage (3).
6. Rotate the inner race downward to insert the inner race into the cage.
7. Insert the cage (4) and inner race into the outer race (1).
8. Place a brass drift against the cage (1).
9. Tap gently on the brass drift in order to tilt the cage (1).
10. Install the first ball (2) when the cage tilts.
11. Repeat previous step to reinstall all of the balls.
