Rainier AWD V8-5.3L VIN P (2004)
Notice: Refer to Fastener Notice in Cautions and Notices.
1. Install the transfer case left rear speed sensor into the transfer case.
^
Tighten the speed sensor to 17 Nm (13 ft. lbs.).
2. Connect the transfer case left rear speed sensor electrical connector.
3. Lower the vehicle.
Right Rear
Transfer Case Speed Sensor Replacement- Right Rear
Removal Procedure
1. Raise the vehicle.
2. Disconnect the transfer case right rear speed sensor electrical connector.
3. Remove the transfer case speed sensor.
Installation Procedure
Notice: Refer to Fastener Notice in Cautions and Notices.
