Reatta V6-231 3.8L VIN C SFI (1990)
Some 1990 Reatta convertibles may demonstrate a binding condition at the door guide pin. This may occur due to excess wear on the end of the guide
pin where it seats in the guide pin locator.
The above condition can be corrected by replacing the door pin guide and locator assembly. Refer to Service Information Manual page 10-6-11, Figure
22.
Replace the original guide pin with the revised 1991 door guide pin (right P/N 3530386 and left P/N 3530387). Replace the guide pin locator with the
revised 1991 locator (P/N 3527433 for right and/or left). These parts are in use on 1991 Reatta convertibles. Lubricate the pin with "Lubriplate 100", or