Reatta V6-231 3.8L VIN C SFI (1990)
Power Seat Switch: All Technical Service Bulletins
Seat Switch Plates - Loose
Bulletin 90-10-35
Date Oct. '90
Ref. No. 90-188-10
Corp. Ref. No. 011613
SUBJECT:
SEAT SWITCH PLATES BECOME LOOSE (REPLACE SCREWS AND COVER)
MODELS AFFECTED:
1990 REATTA
Some 1990 Buick Reattas may experience a condition where the seat switch plates become loose. This may be caused by insufficient retention of the
screw to the switch plate and door pad. To repair this condition use the following procedure:
1.
Remove the cover from the seat switch plate.
2.
Remove the two retaining screws from the seat switch plate and discard. This screw has a Phillips head.
3.
Replace screws with P/N 11504678.
NOTE:
This replacement screw has a Torx head, size T-15.
4.
Replace cover.
5.
Repeat on opposite door pad.
Parts are currently available from GMSPO.
WARRANTY INFORMATION:
Labor Operation No.: T6496
Labor Time:
.2 hour
