Reatta V6-231 3.8L VIN C SFI (1990)
Brake Warning Indicator: All Technical Service Bulletins
Service Procedure
1.
Key off, remove key from ignition.
2.
Remove CPS fuse # 5 from fuse block (left side of center console).
3.
Remove glove box unit, disconnect BCM connectors, and remove BCM. (Refer to section 8C of Service Manual for complete procedure).
4.
Remove BCM Prom access cover and install replacement PROM P/N 16159594. (Follow instructions sheet provided with replacement PROM to
insure proper insertion).
5.
Install BCM Prom access cover, BCM, BCM connectors, and glove box unit.
6.
Reinstall CPS fuse # 5.
7.
Key on, ensure proper operation. Parking brake indicator light should light with parking brake applied in all gears.
8.
Install campaign identification label.
