Reatta V6-231 3.8L VIN C SFI (1990)
Air Bag Control Module: All Technical Service Bulletins
Service Procedure
SERVICE PROCEDURE
Refer to 1990 Riviera and Reatta Service Manual - Section 3F4
1.
Read precautions on handling SIR Inflator Module (pages 2 and 3).
2.
Disable the SIR system (page 2).
3.
Remove and install new Inflator Module (pages 4 and 5).
4.
Enable the SIR system (page 3).
5.
Return the replaced Inflator Module properly tagged, and in the Inflator Module shipping container per the instructions included with the new
module.
CAUTION: DO NOT DEPLOY
6.
Install Campaign Label
