Reatta V6-231 3.8L VIN C SFI (1990)
Impact Sensor: All Technical Service Bulletins
Technical Procedure
INSPECTION
1.
Raise hood and remove the three plastic radiator cover retaining screws and four plastic retaining clips to gain access to the forward discriminating
sensor.
2.
With your hand, feel the routing of the pigtail harness where it attaches to the forward discriminating sensor. Harness should go straight across the
front towards the driver's side of the vehicle with no reversing loop (see enclosed illustration). Harness should have some slackness --
^
If harness is properly routed, proceed to Step 4.
^
If harness routing needs correction, proceed to Step 3.
