Reatta V6-231 3.8L VIN C SFI (1990)
Impact Sensor: Service and Repair
Dual Sensor
1.
Deactivate airbag system as described under MAINTENANCE PROCEDURES/AIRBAG DEACTIVATION.
2.
Remove body computer module and glove compartment assembly.
3.
Remove right side-glass defroster hose and position sound insulation away from cowl.
4.
Disconnect sensor electrical connector and remove two retaining bolts.
5.
Reverse procedure to install, noting the following:
a. Install sensor with arrow pointing toward the front of vehicle.
b. Torque sensor securing bolts to 98 inch lbs.
c. Following installation, activate airbag system as described under MAINTENANCE PROCEDURES/AIRBAG ACTIVATION.
d. Turn ignition switch to the On position and verify the ``Inflatable Restraint'' indicator flashes 7 to 9 times then turns Off. If indicator does not
respond, refer to DIAGNOSIS AND TESTING PROCEDURE/TESTING PROCEDURES/RETRIEVING TROUBLE CODES.