Regal L4-2.0L Turbo (2011)
Note:
*
Position the window outer seal with the sunroof in the front area on markings.
*
Cut off the window seal at the lower area of the opening of the sunroof.
1. Install the window outer seal.
1. Insert the window outer seal into the guide.
2. Cut off the extra window seal and glue the end to the abutting seal (super glue).
2. Install the sunroof housing assembly. Refer to Sunroof Housing Replacement (See: Service and Repair).
3. Install the headlining. Refer to Headlining Trim Panel Replacement (With Sunroof) (See: Interior Moulding / Trim/Headliner/Service and
Repair/Headlining Trim Panel Replacement (With Sunroof))Headlining Trim Panel Replacement (Without Sunroof) (See: Interior Moulding /
Trim/Headliner/Service and Repair/Headlining Trim Panel Replacement (Without Sunroof)).