Regal L4-2.0L Turbo (2011)
13. Remove the seat side inflatable restraint module (1) out of the textile straps (2).
14. Remove the hog rings from the seat cushion (1), pull the cushion cover from the cushion pad (2).
Installation Procedure
1. Install the front seat cushion cover to the cushion pad with new hog rings.
2. Install the seat side inflatable restraint module (1) to the cushion cover with the textile straps (2).
3. Install the front seat back cushion with cushion pad (1) to the backrest frame (2).
Note: Check the correct locking of wiring harness connector (2).
4. Connect the wiring harness connector (2) to the seat side inflatable restraint module (1).