Regal L4-2.0L Turbo (2011)
Brake Rotor/Disc: Specifications
Front Brakes
Brake Rotor Discard Thickness* (J60, J61).................................................................................................................................................27.0 mm (1.07 in)
Brake Rotor Maximum Allowable Assembled Lateral Runout..................................................................................................................0.05 mm (0.002 in)
Brake Rotor Maximum Allowable Thickness Variation.......................................................................................................................0.006 mm (0.00024 in)
Rear Brakes
Brake Rotor Discard Thickness* (J60).....................................................................................................................................................10.00 mm (0.395 in)
Brake Rotor Discard Thickness* (J61).....................................................................................................................................................21.00 mm (0.827 in)
Brake Rotor Maximum Allowable Assembled Lateral Runout..................................................................................................................0.05 mm (0.002 in)
Brake Rotor Maximum Allowable Thickness Variation.......................................................................................................................0.006 mm (0.00024 in)
*All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any
rotor that does not meet the discard thickness specification.