Regal L4-2.0L Turbo (2011)
6. Install the turbo heat shield (2) and the turbo heat shield bolts (1).
Tighten the bolts to 9 Nm (80 lb in)
7. Install the turbo exhaust pipe heat shield (2) and the heat shield bolts (1).
8. Install the O2 sensor. Refer to Heated Oxygen Sensor Replacement - Sensor 1 (See: Powertrain Management/Computers and Control
Systems/Oxygen Sensor/Service and Repair/Heated Oxygen Sensor Replacement - Sensor 1).
9. Install the catalytic converter. Refer to Catalytic Converter Replacement (L4) (See: Exhaust System/Catalytic Converter/Service and Repair
)Catalytic Converter Replacement (LDK or LHU) (See: Exhaust System/Catalytic Converter/Service and Repair).
10. Fill the cooling system. Refer to Cooling System Draining and Filling (GE 47716) (See: Service and Repair/Cooling System Draining and Filling
(GE 47716))Cooling System Draining and Filling (Static Fill) (See: Service and Repair/Cooling System Draining and Filling (Static Fill)).
