Regal L4-2.0L Turbo (2011)
10. To release the tensioner apply a counterclockwise rotational torque to the crankshaft balancer bolt of 45 Nm (33 lb ft)..
11. Remove the camshaft actuator retainer EN-48953 (1).
12. Install the upper timing chain guide and bolts and tighten to 10 Nm (89 lb in).
13. Install the spark plugs. Refer to Spark Plug Replacement (See: Tune-up and Engine Performance Checks/Spark Plug/Service and Repair).
14. Install the camshaft cover. Refer to Camshaft Cover Replacement (See: Cylinder Head Assembly/Valve Cover/Service and Repair).