Regal L4-2.0L Turbo (2011)
10. This step applies to the Safe Lock style only. Push the connector toward the tube in order to release the pressure. Release the second latch (1) with
two fingers. Then press and hold down the bottom release mechanism (2) and pull the connector straight out.
Warning: Refer to Relieving Fuel Pressure Warning (See: Fuel Pressure/Service Precautions).
11. Using a clean shop towel, wipe off the male pipe end.
12. Inspect both ends of the fitting for dirt and burrs.
13. Clean or replace components as necessary.
Installation Procedure
Warning: Refer to Fuel Pipe Fitting Warning (See: Service Precautions/Technician Safety Information/Fuel Pipe Fitting Warning).
1. Apply a few drops of clean engine oil to the male pipe end.
2. Push both sides of the quick-connect fitting together in order to cause the retaining feature to snap into place.
