Regal L4-2.0L Turbo (2011)
8. Remove the banjo bolts (1) and the turbocharger coolant return pipe (2).
Installation Procedure
1. Install NEW gaskets to the banjo fittings (1) on the turbocharger coolant return pipe (2).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the turbocharger coolant return pipe banjo bolts (1).
Tighten the bolt to 35 Nm (26 lb ft).
