Regal L4-2.0L Turbo (2011)
1. Install the power brake booster vacuum rear pipe to the retainer (1) on the dash panel.
2. Connect the power brake booster vacuum sensor electrical connector.
Note: To ease assembly, a small amount of alcohol may be used as a lubricant. Do not use soap.
3. Install the power brake booster vacuum rear pipe vacuum sensor and check valve (2) to the power vacuum brake booster.
4. Connect the power brake booster vacuum sensor electrical connector.
5. Install the power brake booster vacuum rear pipe. Refer to Power Brake Booster Vacuum Rear Pipe Replacement (2.0L) (See: Brakes and
Traction Control/Power Brake Assist/Vacuum Pump/Service and Repair/Power Brake Booster Vacuum Rear Pipe Replacement)Power Brake
Booster Vacuum Rear Pipe Replacement (2.4L) (See: Brakes and Traction Control/Power Brake Assist/Vacuum Pump/Service and Repair/Power
Brake Booster Vacuum Rear Pipe Replacement).
6. Install the power brake booster vacuum pipe. Refer to Power Brake Booster Vacuum Pipe Replacement (2.0L) (See: Brakes and Traction
Control/Power Brake Assist/Vacuum Pump/Service and Repair/Power Brake Booster Vacuum Pipe Replacement)Power Brake Booster Vacuum
Pipe Replacement (2.4L) (See: Brakes and Traction Control/Power Brake Assist/Vacuum Pump/Service and Repair/Power Brake Booster
Vacuum Pipe Replacement).