Regal L4-2.0L Turbo (2011)
Shift Solenoid: Service and Repair
Control Solenoid Valve and Transmission Control Module Assembly Replacement
Removal Procedure
1. Remove the transmission control valve body cover. Refer to Control Valve Body Cover Replacement (See: Automatic
Transmission/Transaxle/Valve Body/Service and Repair/6T30/6T40/6T45/6T50 - Automatic Transmission/Control Valve Body Cover
Replacement).
2. Disconnect the input speed sensor electrical connector (1).
3. Disconnect the output speed sensor electrical connector (2).
4. Disconnect the shift position switch electrical connector (3).
5. Remove the 3 control valve body bolts (1) M5 x 40.5.
6. Remove the 12 control valve body bolts (2) M6 x 97.
