Regal L4-2.0L Turbo (2011)
Fluid Line/Hose: Service and Repair
Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection
Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection
Special Tools
*
DT-28585 - Universal Snap Ring Remover for the 5/8 inch Line
*
DT-41623-B - 3/8 inch Line Quick Release Tool
Removal Procedure
1. Remove the plastic caps from the quick connect fittings by pulling the caps back along the pipe before installation.
2. Install the DT-41623-B - 3/8 inch line quick release tool onto the transmission oil cooler (TOC) pipe, or use the DT-28585 - universal snap ring
remover for the 5/8 inch line.
