Regal L4-2.0L Turbo (2011)
2. Unplug the 2 connectors from the engine speed sensors (2).
3. Remove the wiring harness from the 2 retaining clips (3).
3. Unplug the engine speed sensor connectors.
Detach the connectors from the two mountings (4).
4. Remove the temperature sensor.
1. Remove the screw (1).
2. Lift away the attaching plate (2).
3. Remove the temperature sensor (3).
5. Move the wiring harness for the solenoid valves and the wiring harness for the engine speed sensors aside.