Regal L4-2.0L Turbo (2011)
6. Finish fitting the valve housing.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
7. Tighten the 8 fasteners (arrows) in the specified order.
10 Nm (88 lb in)
8. Install the temperature sensor (3).
1. Moisten the temperature sensor O-ring with gearbox oil.
2. Install the attaching plate (2).
3. Tighten the fastener (1).
10 Nm (88 lb in)
