Regal V6-173 2.8L (1988)
). At least three (3) clicks of the ratchet must be heard.
4.
Inspect operation of stoplamps. Stoplamps should operate at maximum brake pedal travel of 25 mm (1 in.) and throughout the remainder of its
travel. If stoplamps do not operate properly, repeat switch adjustment procedure one more time. If switch still fails to operate properly, refer to the
"STOPLAMP SWITCH ADJUSTMENT CHECK" chart (see Figure 3).
If stoplamps do operate properly, return to step 17 of the "STOPLAMP SWITCH REMOVAL AND INSTALLATION" procedure above.
