Regal V6-191 3.1L (1991)
Brake Caliper: Service and Repair
Mounting Bracket Service
Removal
1.
Remove caliper as outlined previously.
2.
Using suitable Torx bit, remove mounting bracket attaching bolts and the mounting bracket.
Fig. 1 Exploded View Of Delco-Moraine 3242 Series Dual Piston Caliper
Fig. 2 Installing Support Bushing
Bushing & Boot Replacement
1.
Remove mounting bracket from vehicle.
2.
Remove bolt boots from support bushings, Fig. 1.
3.
Clamp bracket in a suitable vise, then pry support bushings from inner bushings in bracket ears with small screwdriver.
4.
Using a paper clip, pull inner bushings from mounting bracket ears.
5.
Lubricate inner bushings with silicone based grease, then install bushings flush with bracket ears.