Regal V6-191 3.1L (1991)
127. Install exhaust crossover pipe.
Tighten bolts to 25 N-m (18 lb.ft.).
128. Connect T.V. cable to transaxle.
129. Connect upper and lower radiator hoses and heater hoses.
130. Install coolant recovery tank.
131. Install air cleaner and duct assembly.
132. Install hood.
133. Install engine oil.
134. Reconnect battery cable.
135. Refill coolant system with new coolant. Add two (2) engine cooling system sealer pellets from package, P/N 03634621, to the radiator. Coolant
must be mixed with equal amounts of water to provide proper protection.
136. Start engine and verify no fluid leaks.
137. Advise owner that battery has been disconnected and clock and radio may need to be reset.
