Regal V6-191 3.1L VIN M SFI (1995)
Keyless Entry Receiver: Service and Repair
Sedan
Remote Door Lock Receiver Installation
Remove or Disconnect
1. Rear seat-to-rear window trim panel.
2. Plastic rivets or screws.
3. Receiver from panel or bracket.
4. Electrical connectors from receiver.
Install or Connect
1. Electrical connectors to receiver.
2. Receiver to panel or bracket.
3. Plastic rivets or screws.
Tighten
^
Screws to 2 N.m (18 lb. in.).
4. Rear seat-to-rear window trim panel.
5. Coding the system, if necessary.