Regal V6-191 3.1L VIN M SFI (1995)
EGR Valve: Service and Repair
EGR Valve Assembly
REMOVE OR DISCONNECT
1. Negative battery cable.
2. Electrical connector at solenoid.
3. Two base to pad bolts or screws.
4. Digital Exhaust Gas Recirculation (EGR) valve.
INSTALL OR CONNECT
1. EGR valve gasket and visually align boles.
2. Align bolts through EGR valve assembly and cast EGR pad of the upper intake manifold and into pipe assembly and torque to 25 Nm (18 lb. ft.).
3. Electrical connector at solenoid.
4. Negative battery cable.
