Regal V6-191 3.1L VIN M SFI (1995)
Throttle Position Sensor: Service and Repair
Throttle Body Assembly
REMOVE OR DISCONNECT
1. Air inlet duct.
2. Sensor electrical connector.
3. Sensor attaching screws and retainers.
4. Sensor and 0-ring.
INSTALL OR CONNECT
1. With throttle valve in the normal closed idle position, install sensor and 0-ring on throttle body assembly.
2. Two sensor screws.
Tighten
^
Screws to 2.0 Nm (18 lb. in.).
3. Sensor electrical connector.
4. Air inlet duct.
