Regal V6-191 3.1L VIN M SFI (1995)
Wiper Switch: Recalls
Service Procedure
INSPECTION
1.
Tilt steering wheel to its lowest position.
2.
Position turn signal arm to simulate a left turn.
3.
With the aid of a flashlight, determine which type of switch is installed:
-
If an original design switch is installed (Figure 1), the switch WILL need to be replaced. Proceed to Step # 4.
-OR-
-
If a NEW design switch has been previously installed (Figure 2), the switch will not need replacement. Proceed to Step # 10.