Regal V6-191 3.1L VIN M SFI (1995)
1. Install the self contained replacement cartridge (1).
NOTICE: Use the correct fastener in the correct location. Replacement fasteners must be correct part number for that application. Fasteners
requiring replacement of fasteners requiring thread locking compound or sealant are identified in the service procedure. Do not use paints,
lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping
force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to
parts and system.
2. Use the J 35671 to install the cartridge closure nut.
Tighten
-
Tighten the strut closure nut to 110 N.m (82 ft. lbs.).
3. Install the J 35668.
4. Remove the J 38844.
5. Install the front suspension strut bumper (1).
6. Raise the strut.
7. Remove the J 35668.
