Regal V6-191 3.1L VIN M SFI (1995)
Power Window Motor: Service and Repair
Sedan
Door Trim Panel
Tool Required
J 24595-C Door Trim Pad and Garnish Clip Remover.
Remove or Disconnect
1. Switch plate assembly.
2. Inside handle bezel.
3. Door lamp or reflector, if present.
4. Window regulator handle, if present.
5. Screws from trim panel.
6. Trim panel using J 24595-C to disengage fasteners from holes in door inner panel.
Install or Connect
1. Trim panel to door.
2. Screws to trim panel.
Tighten
^
Screws to 1.3 N.m (12 lb. in.).
3. Window regulator handle.
4. Door lamp or reflector.
5. Handle bezel.
6. Switch plate assembly.