Regal V6-191 3.1L VIN M SFI (1995)
II.
Wind rush due to gap at windshield side reveal molding to glass, left and/or right side (See Figure 1).
1.
Remove auxiliary weatherstrip to access the windshield side reveal molding retaining screws.
2.
Remove the retaining screws.
3.
Holding the windshield side reveal molding in position, flush the molding to the glass. Determine how much elongation of the screw holes in
the molding is necessary to position the molding flush to the glass. Using a small rattail file, elongate the retaining holes in the direction and
length needed to position the molding flush to the glass.
Labor Operation Table
4.
Reinstall retaining screws and auxiliary weatherstrip.
