Regal V6-191 3.1L VIN M SFI (1995)
4.
Disconnect negative battery cable.
5.
Disable SIR system; refer to "Disabling the SIR System" in Section 3F of the Service Manual
6.
Remove old design windshield washer/wiper switch following instructions outlined in the Service Manual.
7.
Install NEW design switch following instructions outlined in the Service Manual. Ensure wire is correctly positioned as shown,
8.
Connect negative battery cable.
9.
Enable SIR system; refer to "Enabling the SIR System" in Section 3F of the Service Manual.
10.
Install GM Campaign Identification Label.
